The non-prismatic convex uniform 4-polytopes (47 of them) are
covered in ../README.md. The remaining convex
uniform 4-polytopes — the prismatic ones — fall into three
families, two of which are infinite. This document sweeps a
bounded sample of each family and catalogues every zomeable
orthographic projection found.
Sweep parameters: rng = 3, permute_dedup = False,
agnostic search (no kernel-inheritance shortcut, no
obstruction-based filtering). Each polytope is constructed
from scratch and tested identically.
Polytopes covered: 204 (in scope)
| Family | Description | In scope | Hit ≥ 1 | Total shapes |
|---|---|---|---|---|
| A | Polyhedral prisms P × [0,1] |
17 | 12 | 45 |
| B | Duoprisms {p}×{q} |
170 | 6 | 8 + 2 inf families |
| C | Antiprismatic prisms A_n × [0,1] |
17 | 1 | 9 |
| Total | 204 | 19 | 62 + 2 inf families |
A zomeable projection is a rank-3 orthogonal linear map π : ℝ⁴ → ℝ³ whose image of the polytope’s vertex set lies in ℤ[φ]³, such that all edge directions can be aligned (by a global rotation) with canonical Zometool RGBY axes. Vertex multiplicity in the image is allowed (a kernel-aligned projection may collapse several 4D vertices to one 3D point).
Strict rank-3: the image must span a 3D subspace. A 4D → 2D
projection (image planar, sitting in ℝ³ as z = 0) is not a
zomeable projection under this definition. The sweep
enforces this through _try_align (a rotation must exist
that maps the projected edge directions onto Zome axes —
planar images cannot satisfy this for non-collinear edge
sets).
Identical machinery to the 47-corpus sweep:
gen_dirs(rng=3, permute_dedup=False) — False because
prismatic polytopes lack full S₄ axis-permutation
symmetry)..vZome file.Constructive follow-up (2026-05-29): the finite snap/signature probes for
{4}×{6} and {4}×{10} missed inf families, because their fixed
alignment/scale search was not a proof of boundedness. The exact emitter
tools/emit_duoprism_inf_family.py now emits representative members directly
from the arithmetic conditions below.
Post-audit note: the original generic emitter stopped after the first valid
edge-axis alignment. Some symmetric projections have multiple valid alignments,
where only a later alignment gives exact ℤ[φ]³ vertex coordinates. The emitter
now tries all valid alignments before declaring snap_failed. Rechecking the
feature-aligned snap failures recovered four additional models:
tetrahedron_prism/face_first_square, truncated_octahedron_prism/cell_first_cube,
duoprism_4_6/cell_first_cube, and duoprism_4_10/cell_first_cube.
Driver: tools/run_prismatic_sweep.py.
Log: ongoing_work/prismatic_sweep_log.jsonl
(one record per polytope).
17 in scope (the cube prism = tesseract is covered in the main corpus).
| 3D base polyhedron | Distinct shapes |
|---|---|
cuboctahedron (cuboctahedron_prism) |
2 |
dodecahedron (dodecahedron_prism) |
5 |
icosahedron (icosahedron_prism) |
5 |
icosidodecahedron (icosidodecahedron_prism) |
5 |
octahedron (octahedron_prism) |
2 |
rhombicosidodecahedron (rhombicosidodecahedron_prism) |
5 |
| rhombicuboctahedron (rhombicuboctahedron_prism) | 0 |
| snub cube (snub_cube_prism) | 0 |
| snub dodecahedron (snub_dodecahedron_prism) | 0 |
tetrahedron (tetrahedron_prism) |
2 |
| truncated cube (truncated_cube_prism) | 0 |
| truncated cuboctahedron (truncated_cuboctahedron_prism) | 0 |
truncated dodecahedron (truncated_dodecahedron_prism) |
5 |
truncated icosahedron (truncated_icosahedron_prism) |
5 |
truncated icosidodecahedron (truncated_icosidodecahedron_prism) |
5 |
truncated octahedron (truncated_octahedron_prism) |
2 |
truncated tetrahedron (truncated_tetrahedron_prism) |
2 |
{p}×{q}170 in scope (3 ≤ p ≤ q ≤ 20, skipping (4, 4) = tesseract).
6 duoprisms yielded ≥ 1 zomeable projection.
| p | q | Distinct shapes |
|---|---|---|
| 3 | 6 | duoprism_3_6 → 1 |
| 4 | 6 | duoprism_4_6 → 1 cell-first + inf family |
| 4 | 10 | duoprism_4_10 → 1 cell-first + inf family |
| 5 | 10 | duoprism_5_10 → 1 |
| 6 | 6 | duoprism_6_6 → 2 |
| 10 | 10 | duoprism_10_10 → 2 |
The remaining 164 duoprisms produced 0 zomeable projections. Most fail because at least one of the {p}-gon or {q}-gon circles lies in ℤ[√3] (p ∈ {3, 6, 12, …}) or ℤ[√2] (p ∈ {8, …}), which don’t embed in the icosahedral field ℤ[φ]. The icosahedral-compatible regular polygons in range are {4} (in ℤ), {5}, and {10} (both in ℤ[φ]).
For {4}×{q} with kernel n=(a,b,0,0), the {q}-gon plane is preserved and
the square factor becomes four parallel polygon layers. The square edges are
height differences a+b and a-b, not the individual projected square basis
vectors; nevertheless these are still Q(phi) multiples of a single Zome axis.
{4}×{6}: one infinite family with two subfamilies. The B/Y subfamily uses
a blue hexagon plane with yellow height axis and condition
q^2 = 3*(a^2+b^2). The G/Y subfamily uses a green hexagon plane with
yellow height axis and condition 2*q^2 = 3*(a^2+b^2), with q in Q(phi).{4}×{10}: use a blue decagon plane with red height axis. The arithmetic
condition is the tesseract support-2 condition c^2 = a^2+b^2 with
c in Q(phi). Examples emitted: (a,b,c)=(5,12,13) and (8,15,17).17 in scope (n ∈ [4, 20]; n=3 = octahedral prism, in Family A).
1 antiprismatic prism yielded ≥ 1 zomeable projection.
| n | Distinct shapes |
|---|---|
| 5 | 5_antiprismatic_prism → 9 |
The remaining 16 antiprismatic prisms (n ≠ 5) produced 0 zomeable projections: only the pentagonal antiprism embeds in ℤ[φ]³ via the icosahedron’s non-polar vertices.
# Family A (17 polyhedral prisms)
python tools/run_prismatic_sweep.py --family A --rng 3
# Family B (170 duoprisms)
python tools/run_prismatic_sweep.py --family B --rng 3
# Family C (17 antiprismatic prisms)
python tools/run_prismatic_sweep.py --family C --rng 3
# Regenerate per-polytope RESULTS.md files from the sweep log
python tools/build_prismatic_results.py
# Regenerate this doc + the manifest from the sweep log
python tools/build_prismatic_doc.py
# Emit constructive infinite-family examples for {4}x{6} and {4}x{10}
python tools/emit_duoprism_inf_family.py